Anti-Corrosion Product

Our range of anti-corrosion products is designed to prevent the appearance of rust. The treatment is applied here in a preventive manner. Below you will find products for use in routine maintenance, as well as additive products to be added to the baths of closed-circuit machines, for example.

13 products

Frequently asked questions about anti-corrosion products

Why use an anti-corrosion product?

Corrosion is a chemical reaction that forms on metals in contact with air. Rust forms on ferrous metals in contact with air and moisture. This phenomenon is very problematic for industrial operators, particularly between machining and painting operations. Anti-corrosion products (anti-rust products) are designed to prevent the appearance of flash rusting and metal oxidation. They also serve to preserve metal surfaces in order to ensure good electrical contact for grounding. Depending on the desired duration, we have different possible solutions. Our advisors are here to help you make your choice.

How long are parts protected by an anti-corrosion product?

The additives contained in anti-corrosion products are generally intended for temporary inter-operation protection, ranging from a few minutes to several days. For longer-term protection, we recommend the peelable varnishes which will extend protection for several months or even several years. Contact our technicians for any information requests.

Which anti-corrosion product to choose as a preventive treatment?

To prevent corrosion from appearing while your metal parts are drying, use an anti-corrosion additive. The additive is a short-term treatment (approximately 15 days), to be diluted in a water-based solution, which leaves a very thin film invisible to the naked eye, forming a barrier against oxidation. Use a peelable varnish to protect metal over a medium to long-term period. In addition to preventing corrosion, it protects against scratches and minor impacts. In keeping with our environmentally responsible approach, we do not sell our products in aerosol format, but in drums. Find all our products on this page.

Which anti-corrosion product to choose as a curative treatment?

If corrosion has already set in, you can eliminate it using a product designed for this purpose. The rust converter transforms corrosion into a thin protective layer of black color. It can be used on all ferrous metals, and particularly on thin metals. Our METALPRO product has a slightly matte finish, tending toward satin. Use the phosphating degreaser for thicker metals. Based on phosphoric acid, this product eliminates rust. Find all our products on this page.

Discover our other special metal protection, and our anti-corrosion additives, and our phosphoric acid and oxalic acid.

Frequently asked questions about anticorrosion products

Why use an anticorrosion product?

Corrosion is a chemical reaction that forms on metals when exposed to air. Rust forms on ferrous metals when exposed to air and moisture. This phenomenon is very problematic for industrial operators, particularly between machining and painting operations. Anti-corrosion products (anti-rust products) are designed to prevent the appearance of flash rusting and the oxidation of metals. They also serve to preserve metal surfaces in order to ensure good electrical contact for earthing. Depending on the desired duration, we have different possible solutions. Our advisors are here to help you make your choice.

How long are parts protected by an anticorrosion product?

The additives contained in anti-corrosion products are generally intended for temporary inter-operation protections, ranging from a few minutes to several days. For longer-lasting protection, we recommend peelable varnishes which will extend protection over several months or even several years. Contact our technicians for any information requests.

Which anti-corrosion product should you choose for preventive treatment?

To prevent corrosion from appearing during the drying of your metal parts, use an anti-corrosion additive. The additive is a short-term treatment (approximately 15 days), to be diluted in a water-based solution, which leaves a very thin film invisible to the naked eye, forming a barrier against oxidation. Use a peelable varnish to protect the metal over the medium to long term. In addition to preventing corrosion, it protects against scratches and light impacts. In keeping with our commitment to environmental responsibility, we do not sell our products in aerosol format, but in drums. Find all our products on this page.

Which anti-corrosion product should you choose for curative treatment?

If corrosion has already set in, you can eliminate it using a product designed for this purpose. The rust converter converts corrosion into a thin protective layer of black colour. It is used on all ferrous metals, and particularly on thin metals. Our METALPRO product has a slightly matte finish, tending towards satin. Use the phosphating degreaser for thicker metals. Based on phosphoric acid, this product eliminates rust. Find all our products on this page.

Discover our other special metal protection, and our anti-corrosion additives, and our phosphoric acid and oxalic acid.