Tar, Bitumen, Resin Cleaner for bodywork and plastics

Bodywork and plastics tar remover cleaner – ARCANE TAR REMOVER

Reinforced formulation to effectively dissolve tar, bitumen, and resins on rims, bodywork, and plastics. Can be used neat or diluted, with moderate evaporation and good wettability.

Description

ARCANE TAR REMOVER is a degreasing cleaner designed to dissolve tar, bitumen, and tree resin stains on vehicle bodywork, bumpers, rims, and plastics.
It is a degreasing formulation based on high flash point dearomatized hydrocarbons, reinforced and water-emulsifiable.
ARCANE TAR REMOVER has a low surface tension for good surface wetting with moderate evaporation. It can be used as a complement before applying the Plastic and bumper renovator.

ADVANTAGES

• Reinforced formula for tar, bitumen, and pine resins
• Moderate evaporation: allows time to act without instant drying
• Low surface tension: excellent wettability
• Can be used neat or diluted, depending on the level of soiling
• Dearomatized hydrocarbon base: safer than traditional solvents
• Compatible with many automotive plastics (carry out a prior test)

APPLICATION AREA

• Tar and bitumen remover
• Mechanical parts degreaser
• Wax remover for bodywork and plastic surfaces

COMPATIBLE MATERIALS

• Automotive bodywork
• Plastic bumpers
• Rims
• Metallic mechanical parts

APPLICATION

Equipment: Cloth, brush, and all application tools (e.g., paint spray gun).
Dilution: Neat or diluted according to application requirements.
Application: By cloth or spraying.

Heavy soiling:

• Spray directly onto the surface (rims, bodywork) and leave to act for 2–3 min. (Do not spray on wet surfaces.)
• Clean with a cloth or pressure washer.
• Always wipe dry or ideally rinse the treated surfaces. Never allow Tar Remover to dry in the sun.

Light to moderate soiling:

Mix ARCANE TAR REMOVER at 25–50% vol. in hot water, stir to obtain a homogeneous solution, and spray onto the surface. Leave to act for 2–3 min.

• Clean with a cloth or pressure washer.
• Always wipe dry or rinse the treated surfaces. Never allow Tar Remover to dry in the sun.

SAFETY PRECAUTIONS

• Carry out a prior test on sensitive plastics or painted surfaces
• Wearing gloves recommended (butyl rubber)
• Shelf life of 1 year in the original sealed packaging