Supprimer tags et graffitis : protocole de nettoyage pour les services techniques et collectivités
Nettoyage et décapage

Removing Tags and Graffiti: Cleaning Protocol for Municipal Maintenance Departments and Local Authorities

Key takeaways

  • The choice of stripper depends on the surface: bare concrete, natural stone, painted metal, and PVC do not have the same resistance to chemicals.
  • ARCANE 226 US GEL is a ready-to-use gel graffiti remover, particularly suited to vertical surfaces.
  • Contact time must be adjusted to the graffiti and the coating: from 5 minutes to several hours, depending on the situation, with regular monitoring.
  • High-pressure rinsing is not always necessary: it depends on the durability of the material.

For local government maintenance departments, condominium property managers, and professional cleaning companies, effectively removing a tag or graffiti requires a method suited to the substrate, the type of paint, and how long the marking has been there.

Poorly controlled treatment can leave marks, damage a coating, or drive pigments deeper into a porous material.

Which graffiti remover should you use for each surface?

Facades, boundary walls, public facilities, and street furniture have very different characteristics. Before stripping, it is essential to identify the material being treated.

Surface Recommended method Key precautions
Bare concrete Apply the gel to the affected area, monitor its action, then rinse appropriately. Pigments can penetrate the pores.
Natural stone Test first, apply carefully, and remove gradually. Risk of changing the appearance of or damaging fragile stone.
Painted metal Test on an inconspicuous area, monitor the contact time, and wipe gently. Risk of damaging the original paint.
PVC and plastics Compatibility testing and localized application. Sensitivity to solvents varies, with a risk of dulling or deformation.
A preliminary test on a small area is essential before any treatment.
Important: no single procedure suits every material. Confirm the stripper's compatibility before treating the entire surface.

Professional protocol for removing tags and graffiti

An effective procedure has four steps: identify the substrate, apply the stripper, monitor its action, and rinse.

Step Objective Method Key precautions
1. Assessment Identify the substrate and graffiti Visual inspection and test on an inconspicuous area Check porosity and existing coatings
2. Stripping Soften and loosen the paint ARCANE 226 US GEL, where compatible Monitor the contact time.
3. Removal Remove loosened pigments Gentle scrubbing and residue removal Avoid abrading the material
4. Rinsing Remove the stripper and residues Gentle rinsing or rinsing at an appropriate pressure Plan for the collection of wastewater and residues

1. Identify the surface and prepare for treatment

Before applying a stripper, check:

  • The type of substrate and the possible presence of a coating.
  • The type of graffiti: spray paint, marker, ink, or thick paint.
  • The condition of the surface : porosity, fragility, and the presence of dirt.

Protect surrounding elements and remove surface dirt that could interfere with the product's action.

Reminder: the use of a pressure washer on porous or soft materials (such as certain types of limestone) must be carried out with care to avoid opening up the substrate’s pores.

2. Apply ARCANE 226 US GEL stripper

ARCANE 226 US GEL is a ready-to-use gel formulation designed to strip tags, inks and paints.

Its texture keeps the product in contact with graffiti, particularly on walls and other vertical surfaces.

Procedure:

  1. Apply the product undiluted with a brush or roller.
  2. Allow it to work while monitoring the paint as it softens.
  3. Rub gently if necessary.
  4. Remove residue, then rinse according to the type of surface.
ARCANE 226 US GEL is ready to use and requires no dilution. Use it in accordance with the technical data sheet recommendations and the surface's compatibility.

Advice from our laboratory

Simply increasing the contact time is not always the best solution.

Results depend on the type of graffiti, its thickness and the porosity of the material. On sensitive substrates, test first and work in stages rather than allowing prolonged, uncontrolled contact.

3. Adjust the contact time

The approximate working time of ARCANE 226 US GEL can range from 5 minutes to several hours, depending on the coating to be removed.

To determine when to remove it, watch for the graffiti to lift or soften.

On a painted or plastic substrate, do not prolong contact without first confirming compatibility.

Caution: a contact time too long may damage certain coatings, particularly original paint finishes and solvent-sensitive materials.

4. Rinse without damaging the material

Rinsing removes the stripper and loosened pigments.

  • On durable, unfinished concrete: pressure rinsing with water may be considered after testing.
  • On natural stone: adjust the pressure to avoid eroding the surface and mortar joints.
  • On painted metal or PVC: opt for gentle wiping and rinsing when the surfaces are compatible.

A pressure washer is therefore not required. Its use should be adapted to the material and its condition.

Also plan to collect and manage stripping residue and wash water according to the requirements applicable to the job site.

Public works employee removing graffiti from street furniture

Mistakes to avoid when removing graffiti

An unsuitable method can leave marks or permanently damage the substrate.

Practices to avoid

  • Applying a stripper to a painted or plastic surface without testing it first.
  • Using excessive pressure on fragile stone.
  • Leaving the product to work without monitoring the stripping process.
  • Using a standard maintenance cleaner to remove strongly adhered paint.
  • Allowing stripping residue to run off without an appropriate collection system.

For fragile or historic surfaces, particularly old stone, deteriorated substrates, or specialty coatings, a technical assessment beforehand is essential.

Which professional products should you choose from Arcane Direct?

ARCANE 226 US GEL: remover for tags and graffiti

This gel stripper is intended to remove graffiti, ink, and paint from various surfaces, provided they are compatible.

Its main advantages:

  • Ready-to-use formulation; no dilution required.
  • Gel texture suitable for vertical surfaces.
  • Acts on various types of paint and ink.
  • Methylene chloride-free formula.
  • Can be rinsed with water

ARCANET SAFECLEAN: additional cleaning and maintenance

This ethanol-based multi-surface cleaner is intended for maintaining compatible surfaces.

It can be incorporated into a maintenance program for street furniture, facilities, and common areas.

A maintenance cleaner is no substitute for a dedicated paint stripper when removing strongly adhered paint.

Safety and work planning

For professional cleaning crews, every job should be guided by the product’s technical data sheet and safety data sheet (SDS).

Provide appropriate personal protective equipment (PPE), protect passersby and adjacent surfaces, and arrange for residue collection where necessary.

The protocol must also account for site constraints: access to water, work at height, nearby plants, and how often treatment is needed.

Caution: Stripping residues and wash water must be collected and managed in accordance with the requirements applicable to the job site. Prevent any uncontrolled discharge into the storm drain system.

Need help defining your graffiti removal procedure?

The choice of product and method depends on the surface, the type of graffiti, and your site's constraints.

The Arcane Direct team can help you choose solutions suited to local authorities, condominium property managers, and professional cleaning companies.

Phone: +33 4 42 82 16 82

Email: contact@arcane-direct.com

EXPLORE OUR PROFESSIONAL SOLUTIONS

Product(s) featured in this article

Graffiti tag remover cleaner - ARCANE 226 US GEL - 5L Bucket Graffiti tag remover cleaner - ARCANE 226 US GEL - 5L Bucket
5L Bucket
Vendor:
Regular price 61,30€ excl. VAT
Sale price 61,30€ excl. VAT Regular price excl. VAT
Multi-Surface Sanitizing Cleaner - ARCANET SAFECLEAN - 54 STD Wipes 180x400mm Multi-Surface Sanitizing Cleaner - ARCANET SAFECLEAN - 54 STD Wipes 180x400mm
54 STD Wipes 180x400mm
Vendor:
Regular price 30,70€ excl. VAT
Sale price 30,70€ excl. VAT Regular price excl. VAT
Back to blog
Learn more

What product should I use to remove graffiti from concrete?

A gel paint stripper such as ARCANE 226 US GEL can be used on compatible bare concrete. A preliminary test helps determine the appropriate contact time and rinsing method.

How long should an anti-graffiti remover be left on?

With ARCANE 226 US GEL, the recommended contact time ranges from 5 minutes to several hours, depending on the paint. Remove it based on how much the paint has softened and the durability of the surface.

Can you use a pressure washer to remove graffiti?

Yes, on surfaces that are durable enough, after checking their suitability. Excessive pressure can damage delicate stone, painted surfaces, or plastics.

How do you remove graffiti from a painted surface?

Check that the graffiti remover is compatible with the original coating. Testing it on an inconspicuous area is essential to reduce the risk of removing the underlying paint as well.

Can graffiti be removed from PVC?

Graffiti removal should only be attempted after a compatibility test. Some plastics may become dull, warp, or be damaged by stripping products.